Stan's NoTubes XC 29er Tubeless Tyre Kit
Up to 12 months interest free
Stan's No Tubes Tubeless System converts your existing wheel set to tubeless whether your rims are tubeless or not. Stan's system allows you to use either standard or tubeless tyres, saving hundreds of dollars and weight over purchasing other Tubeless Systems. It fits most 29er mountain bike rims, with 32mm core presta valve stems.
The system works by combining a moulded rim strip and a non-adhesive, no mess solution with micro sealing particles to create an air-tight seal between your tyre and the rim strip/rim flange.
- Two moulded rim strips with removable valve cores
- One pint of Stan’s Tyre Sealant with a 60g scoop and spout
- One 9.1 metre roll of spoke tape
- NoTubes.com Decal
- Detailed instructions
Please visit the support page on www.notubes.com for details on rim compatibility and recommended tyres
Features & Benefits:
- Stan’s Tubeless System offers two sealing points on the tyre versus other tubeless systems which use only the bead lock as their sealing point. First the bead lock is sealed, as well as the lower portion of the tyre and rim to create a second inner seal. This unique design allows you to break the bead lock seal without losing air pressure. Secondly, the inner seal flexes inwards with the tyre to maintain air pressure The patented Rim Strip makes installation simple. It can be removed as easily as a tube and can be used over and over again. Time involved can be less than 10 minutes per wheel. With this system you can lose rotating weight in an area that previously was not possible.
- Your lightweight wheel set can be converted to a tubeless set up with only 56 grams of added weight per wheel. Saving hundreds of dollars over purchasing new wheels.
- No need to worry about the dreaded pinch flat.
- Possibly never having another puncture flat again because of the self-sealing qualities of Stan’s Tyre and Rim Sealant.
- You will be able to keep using your lightweight tyres and not be limited to buying expensive and much heavier tubeless specific tyres.
- The New Moulded Rim Strip features a new Presta valve stem with a removable core allowing you to add sealant without removing the tyre. This removable valve core will make inflating easier by increasing the air flow into the tyre. Removing the valve core also allows for cleaning or easy replacement.
- Stan’s Tyre & Rim Sealant can also be used to seal punctures and slow leaks that occur in most tubeless tyres. As a result, your tubeless tyres will hold air for longer periods of time.
|Click & Collect||Yes|